Generators and industrial machinery are most commonly lifted with mobile cranes, such as hydraulic truck cranes, all-terrain cranes, rough terrain cranes, and crawler cranes, together with rigging gear like slings, shackles, spreader bars, and lifting beams. For lighter or indoor jobs, boom trucks, overhead bridge cranes, gantry cranes, forklifts, and machinery-moving systems may do the work instead. The right choice depends on the load weight, lift height, working radius, ground conditions, and how much space is available.
Whether you are setting a standby generator at a data center, replacing a compressor at a plant, or moving a press into a new facility, this guide explains the equipment involved and how to choose it. The principles apply anywhere in the United States.
Equipment Used for Generators and Machinery
- Mobile hydraulic truck cranes: fast to set up, ideal for urban and commercial sites
- All-terrain cranes: highway-capable cranes for longer reaches and heavier loads
- Rough terrain cranes: built for uneven, unpaved, or undeveloped sites
- Crawler cranes: very high capacity and stability for the heaviest lifts
- Boom trucks and knuckle boom cranes: smaller loads and tight access
- Overhead bridge cranes and gantry cranes: indoor plants and fixed lifting areas
- Forklifts and telehandlers: lighter equipment on stable ground
- Jacking, skidding, and machinery-moving systems: inside buildings where a crane cannot reach
- Rigging gear: slings, shackles, spreader bars, lifting beams, tag lines, and crane mats
1. Mobile Hydraulic Truck Cranes
A mobile truck crane is one of the most common choices for generators and machinery because it arrives ready to work, sets up quickly, and can be positioned close to the job. Telescopic booms extend to reach over buildings, fences, and equipment pads, and outriggers provide stability once the crane is leveled.
These cranes are widely used for commercial generator installations, HVAC and mechanical equipment, and general industrial moves. Choosing the right crane for your project starts with matching the machine to the load and the site.
2. All-Terrain Cranes
All-terrain cranes combine road travel with off-road capability. They can drive to the site on public roads, then lift heavy loads with long booms and high capacity. They are a good fit for large generators, transformers, and industrial equipment that must be placed at distance or height.
3. Rough Terrain Cranes
Job sites for power generation, oil and gas, and construction are not always paved or level. A rough terrain crane is designed to work on soft, uneven, or undeveloped ground, which makes it a strong choice for remote generator placements, pad sites, and industrial yards. Our oil and gas and renewable energy crane services often rely on this type of equipment.
4. Crawler Cranes
Crawler cranes ride on tracks that spread the load across a large footprint, giving them high stability and very large lifting capacity. They are used for the heaviest industrial equipment, large power plant components, and lifts where ground bearing and stability are critical. Setup can take longer than a truck crane, so they are typically reserved for larger or longer-duration projects.
5. Boom Trucks and Knuckle Boom Cranes
For smaller generators, compact machines, and tight access, a boom truck or knuckle boom crane can be a practical solution. These units offer easier travel, quick setup, and good flexibility on small sites, though their capacity and reach are lower than larger mobile cranes.
6. Overhead Bridge Cranes and Gantry Cranes
Inside a plant or warehouse, permanently installed overhead bridge cranes and gantry cranes move machinery along a fixed path over the work area. They are ideal for repeated lifts such as moving components between stations, but they are limited by their rated capacity and by where the building and runway allow them to reach.
7. Forklifts and Telehandlers
Forklifts and telehandlers can lift and place lighter machinery or generators when the ground is firm and the equipment has clear approach paths. They are not a substitute for a crane when the load is heavy, when the lift is high, or when the load must be suspended on rigging.
8. Jacking, Skidding, and Machinery-Moving Systems
Some machinery never leaves the ground floor. In plants where a crane cannot fit, machinery can be raised with hydraulic jacks, moved on skates or rollers, and positioned into place using skidding systems. This approach is common for moving presses, large motors, and equipment inside existing buildings.
Rigging Equipment That Makes the Lift Possible
The crane lifts the load, but rigging attaches it. The most common rigging gear for generators and machinery includes:
- Slings: wire rope, chain, or synthetic round slings rated for the load and the angle
- Shackles and hooks: connect slings to lifting points
- Spreader bars and lifting beams: keep sling angles safe and protect delicate housings
- Lifting lugs and pad eyes: manufacturer-approved points built into the equipment or skid
- Tag lines: control rotation and swing as the load moves
- Crane mats and cribbing: spread outrigger or track loads across soft ground
- Load cells or scales: confirm weight when it is uncertain
Poor rigging is a leading cause of lift failures, so it deserves as much planning as the crane itself. See common crane rigging mistakes and how crane rigging works for a closer look. OSHA also sets requirements for rigging equipment for material handling on construction sites.
How to Choose the Right Equipment
Before choosing a crane or lifting method, work through these factors:
- Actual load weight: use the equipment’s published weight and include rigging and hook block weight
- Lift points and center of gravity: follow the manufacturer’s instructions for lifting generators and machinery
- Working radius and height: capacity drops as the load moves farther from the crane
- Site access: road width, gates, overhead lines, buildings, and turning space
- Ground conditions: soil bearing, slope, buried utilities, and the need for crane mats
- Indoor or outdoor: indoor lifts may call for bridge cranes, jacks, or skidding
- Duration and schedule: the setup time of the equipment affects the cost
- Weather: wind and storms can limit lifting, especially for large or flat-sided equipment
For sizing guidance, read about what size crane you need and how much weight a crane can lift.
Special Considerations for Generators
Generators are heavy, compact, and expensive, and many have delicate components such as radiators, control panels, and fuel systems. A few points matter on almost every generator lift:
- Use the manufacturer’s lift points and diagram, never improvised attachment points
- Confirm whether the weight includes fuel, fluids, and any enclosure
- Protect panels, exhausts, and enclosures from sling contact
- Check the pad, access path, and clearances before lifting
- Plan for overhead lines and building obstructions near the placement
How a Professional Machinery Lift Is Planned
A professional lift generally follows a clear process:
- Confirm the load weight, dimensions, and lift points
- Visit the site and review access, ground, and overhead hazards
- Select the crane and rigging for the lift
- Create a written lift plan and hold a pre-lift meeting
- Set up the crane on stable ground with outriggers and mats as needed
- Rig the load and perform a test lift before moving it
- Lift, set, and secure the equipment, with a signal person guiding the operator
Complex or high-risk lifts need extra care. See how to plan a critical lift for heavy equipment and our guide to safely lifting heavy machinery on a job site.
Why Operator Qualification Matters
The equipment is only as safe as the people using it. Certified crane operators understand load charts, rigging, signals, and hazard awareness. The National Commission for the Certification of Crane Operators (NCCCO) is one widely recognized certification body, and OSHA’s cranes and derricks standard covers operator qualification for construction work. Knowing the common causes of crane accidents helps owners and managers ask the right questions before hiring.
Frequently Asked Questions
What type of crane is used to lift a generator?
Most generators are lifted with a mobile hydraulic truck crane, all-terrain crane, or rough terrain crane. The best choice depends on the generator’s weight, the lift radius and height, and the site conditions.
Can a forklift lift a generator?
A forklift or telehandler can move smaller generators on firm ground, but it is not suitable for heavy units, high lifts, or situations that need slings and a suspended load. When in doubt, use a crane.
How heavy are industrial generators?
Weights range from a few hundred pounds for small units to many tons for large industrial and utility-scale generators. Always use the manufacturer’s published weight and confirm what is included, such as fuel, fluids, and enclosures.
How do you lift machinery inside a building?
Inside buildings, machinery is moved with overhead bridge cranes, gantry cranes, forklifts, jacks, skates, and skidding systems, depending on the weight and the available space.
What rigging is used to lift generators?
Common rigging includes properly rated slings, shackles, spreader bars or lifting beams, and tag lines. The rigging should attach to manufacturer-approved lift points and match the load and sling angles.
Do I need a crane operator and a rigger?
For most crane lifts, yes. The operator runs the crane, while the rigger attaches and controls the load.
How do I know what size crane I need?
Start with the load weight, then check the working radius, boom length, and ground conditions against the crane’s load chart. A qualified lift professional can confirm the right size.
Lift Your Generator or Machinery With MHM Cranes
The right crane, rigging, and planning keep expensive equipment and the people around it safe. MHM Cranes provides professional crane services and heavy lifting solutions for residential, commercial, and industrial projects across Texas and Oklahoma, including HVAC, civil construction, utility, and oil and gas work.
Have a generator or machine to move? Explore our crane services and crane equipment, or contact us for a quote.